{"product_id":"roboparty-romomo-10062-joint-module","title":"RoboParty ROMOMO 10062 Joint Module","description":"\u003cp\u003eThe ROMOMO 10062 is the largest module in RoboParty's joint-module family and the module behind the 160 N·m peak torque of its humanoids. Rated torque is 44 N·m (±5 %) at 80 rpm through a 22:1 reduction, with a 130 rpm peak speed, a measured prototype mass of 1,197 g and an envelope of 100 mm outer diameter by 61.7 mm (±0.5) axially with a 7.5 mm hollow bore.\u003c\/p\u003e\u003cp\u003eThe 160 N·m headline belongs to this model and to short-duration conditions only — it is not a continuous rating, and it is not the torque of every joint in a robot that uses the family. Sustained work is sized from the rated column with a defined duty cycle. Further motion data: no-load speed 141 rpm (±10 %), rated power 370 W (±5 %) and backlash of 11.4 arcmin.\u003c\/p\u003e\u003cp\u003eElectrically it draws 11 A (±5 %) rated and 55 A (±10 %) peak from 48 V, with 0.179 Ω line resistance at 20 °C, 0.244 mH line inductance, a 10.8 V\/krpm back-EMF constant and fourteen pole pairs — a much heavier supply than the 2 A rated of the small 6562. Feedback is dual encoders at 17 bit and 19 bit, designated inner ring and outer ring on this model, over CAN FD or EtherCAT. Motor rotational inertia is 60.6 kg·mm². The torque constant is 0.163 N·m\/A; confirm its reference convention with the quotation before using it in a current-to-torque calculation.\u003c\/p\u003e\u003cp\u003eROMOMO modules are RoboParty's own actuators, the same family used in its ROBOTO 01 humanoids. The family is built for clamp fixation and hollow cable routing through the output, with access to hardware drawings and driver source code. Hollow dimensions and mounting details vary by model and are confirmed against this module's drawing. Insulation is class F (155 °C), which is an insulation rating rather than an ambient operating temperature; ingress protection and any certified safety function are confirmed with the quotation.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 N·m rated, 160 N·m peak:\u003c\/strong\u003e The family's headline peak torque belongs to this module and to short-duration conditions, not to continuous operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 rpm rated through a 22:1 reduction:\u003c\/strong\u003e Peak speed is 130 rpm and no-load speed 141 rpm (±10 %), each separate from the rated figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm diameter, 1,197 g:\u003c\/strong\u003e The axial dimension is 61.7 mm (±0.5) with a 7.5 mm hollow bore, the largest envelope in the family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e370 W rated power:\u003c\/strong\u003e Backlash is 11.4 arcmin and motor rotational inertia at 60.6 kg·mm² for simulation inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 A rated, 55 A peak at 48 V:\u003c\/strong\u003e Line resistance of 0.179 Ω, inductance of 0.244 mH, a 10.8 V\/krpm back-EMF constant and fourteen pole pairs define the electrical envelope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual encoders over CAN FD or EtherCAT:\u003c\/strong\u003e Resolution is 17 bit and 19 bit, designated inner ring and outer ring on this model; confirm the assignment against the drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHollow cable routing and clamp fixation:\u003c\/strong\u003e Hardware drawings and driver source code are available for the family, and the hollow dimension is specific to this module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"RoboParty","offers":[{"title":"Default Title","offer_id":67847202210082,"sku":"RoboParty-ROMOMO-10062","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/roboparty-romomo-10062_1.png?v=1794972750","url":"https:\/\/robotixmarket.fr\/en\/products\/roboparty-romomo-10062-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}