- 267 to 459 N·m across five ratios Ratios of 51, 81, 101, 121 and 161 step peak torque from 267 N·m at 55 RPM to 459 N·m at 18 RPM.
- 1,000 W at up to 20.2 A continuous Rated at 24–48 V with 15.8 A rated and 20.2 A maximum continuous current — the higher of the two 100-frame current ratings — and a 0.175 N·m/A torque constant.
- Lighter of the two 100-frame modules The base build is 2.52 kg against 3.96 kg for the CRA-RI100-142, on the same torque table.
- 32 mm hollow shaft Wide enough for a limb's cable bundle to pass through a proximal joint's rotation axis.
- 10 arcsec backlash from the 101 ratio Gear backlash is 20 arcsec at ratios 51 and 81 and 10 arcsec at 101, 121 and 161.
- Three fully specified builds 100.5 mm at 2.52 kg for the base unit, 121.5 mm at 3.21 kg for the -B body, and 103.5 mm at 2.51 kg for the -2E-EC.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI100-120 is a high-torque integrated joint: 267 N·m peak at the 51 ratio rising to 459 N·m at 161, through a 32 mm hollow shaft, from a 2.52 kg base build. Five gear ratios are offered — 51, 81, 101, 121 and 161 — and peak speed falls from 55 RPM to 18 RPM across that span while backlash tightens from 20 arcsec to 10 arcsec at 101 and above.
Within the Ti5 100 frame it is the lighter and the harder-driven of the two. It shares the 100-142's torque table and 1,000 W rating but comes in at 20.2 A maximum continuous current against that module's 16.9 A, and at 2.52 kg against 3.96 kg for the base build. Rated current is 15.8 A on both, the supply window is 24–48 V and the torque constant is 0.175 N·m/A.
Three builds are fully specified. The base unit is 100.5 mm long at 2.52 kg with a 16-bit encoder on CAN. The -B build extends the housing to 121.5 mm at 3.21 kg. The -2E-EC build is 103.5 mm at 2.51 kg and adds a dual-encoder arrangement at 16/18-bit resolution with EtherCAT alongside CAN, which is what high-rate deterministic motion networks need. The -B-2E-EC designation combines both suffixes, and its figures are confirmed with the quotation.
This is a joint for the axes that carry the machine: hips, knees, torso and shoulder joints on humanoid platforms, base axes on collaborative arms, exoskeleton research rigs and heavy test fixtures. The 32 mm bore matters there, because a proximal joint usually has every cable in the limb passing through it. It remains a component — structure, controller, power distribution and software are the integrator's work.
Key Capabilities
- 267 to 459 N·m across five ratios: Ratios of 51, 81, 101, 121 and 161 step peak torque from 267 N·m at 55 RPM to 459 N·m at 18 RPM.
- 1,000 W at up to 20.2 A continuous: Rated at 24–48 V with 15.8 A rated and 20.2 A maximum continuous current — the higher of the two 100-frame current ratings — and a 0.175 N·m/A torque constant.
- Lighter of the two 100-frame modules: The base build is 2.52 kg against 3.96 kg for the CRA-RI100-142, on the same torque table.
- 32 mm hollow shaft: Wide enough for a limb's cable bundle to pass through a proximal joint's rotation axis.
- 10 arcsec backlash from the 101 ratio: Gear backlash is 20 arcsec at ratios 51 and 81 and 10 arcsec at 101, 121 and 161.
- Three fully specified builds: 100.5 mm at 2.52 kg for the base unit, 121.5 mm at 3.21 kg for the -B body, and 103.5 mm at 2.51 kg for the -2E-EC.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI100-120-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Gear Ratios | 51, 81, 101, 121, 161 |
| Peak Torque | 267 / 376 / 411 / 436 / 459 N·m (ratios 51 / 81 / 101 / 121 / 161) |
| Max Allowable Torque at Average Load | 133 / 206 / 267 / 267 / 267 N·m |
| Rated Torque at 2000 RPM Input | 94 / 146 / 169 / 169 / 169 N·m |
| Peak Speed | 55 / 37 / 29 / 24 / 18 RPM |
| Rated Speed at Half Rated Torque | 44 / 29 / 22 / 18 / 12 RPM |
| Gear Backlash | 20 arcsec at ratios 51 and 81; 10 arcsec at 101, 121 and 161 |
| Rated Power | 1,000 W |
| Supply Voltage | 24–48 V |
| Rated Current | 15.8 A |
| Max Continuous Current | 20.2 A |
| Torque Constant | 0.175 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 32 mm |
| Length | 100.5 ±0.5 mm base; 121.5 ±0.5 mm -B; 103.5 ±0.5 mm -2E-EC |
| Mass | 2.52 kg base; 3.21 kg -B; 2.51 kg -2E-EC |
| Rotor Inertia | 3,910.2 g·cm² base; 4,744.7 g·cm² -B; 5,962.63 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Five: 51, 81, 101, 121 and 161. Peak torque rises from 267 N·m to 459 N·m across them while peak speed falls from 55 RPM to 18 RPM.
Two figures. The 100-120 base build is 2.52 kg against 3.96 kg, and its maximum continuous current is 20.2 A against 16.9 A. The gear ratios, torque and speed tables, 1,000 W rating, 15.8 A rated current, 32 mm bore and housing lengths are the same on both.
The -2E-EC build, with a dual-encoder arrangement at 16/18-bit resolution and CAN or EtherCAT. The base and -B builds use CAN with a 16-bit encoder.
Masses are 2.52 kg for the base build, 2.51 kg for the -2E-EC and 3.21 kg for the extended -B body. The -B-2E-EC mass is confirmed with the quotation.
No. It is a joint actuator. Building a working machine additionally needs structural links, a controller, power distribution and software developed by the integrator.
It is offered by quotation. Version, gear ratio or configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
