- Mobile crane for the H2 A castor-mounted lifting frame with winch, arm and hook, made for the 182 cm humanoid.
- Suspended power-on Holds the robot with its feet off the ground while it starts up and enters its ready state.
- Safe shutdown and standby The H2 is re-suspended before power-off and for long standby, so it cannot fall when its joints lose power.
- Unboxing and handling Lifts the H2 out of its lying-posture packaging case on the shoulder lanyard.
- Lockable castors The base wheels lock before use and let the stand roll between work areas.
- A second stand for labs Each H2 ships with one; an extra stand serves a second robot, area or test track.
Description
This is the protective stand for the Unitree H2: a mobile crane on lockable castor wheels, with a column, a lifting arm worked by a hand-cranked winch and a suspension hook. A lanyard runs through the suspension latches on both of the H2's shoulders and onto the hook, so the 182 cm, 70 kg humanoid hangs with its feet clear of the ground.
The stand is part of the H2's everyday routine. The robot is lifted out of its packaging case with it, powered on while suspended, and released from the hook only once it is standing steadily. Before shutdown it goes back on the stand, because a humanoid that loses power while standing falls; the same applies to a forced shutdown and to long standby in damping mode. During motion, a tether or the stand is recommended wherever possible to guard against falls.
Every H2 is delivered with one stand. A second one is for a lab with more than one H2, a second work area or test track, or a replacement, so the robot is never started or parked without one.
Rated load, lifting height, footprint and shipping weight, and whether a suspension lanyard is included, are confirmed at quote.
Key Capabilities
- Mobile crane for the H2: A castor-mounted lifting frame with winch, arm and hook, made for the 182 cm humanoid.
- Suspended power-on: Holds the robot with its feet off the ground while it starts up and enters its ready state.
- Safe shutdown and standby: The H2 is re-suspended before power-off and for long standby, so it cannot fall when its joints lose power.
- Unboxing and handling: Lifts the H2 out of its lying-posture packaging case on the shoulder lanyard.
- Lockable castors: The base wheels lock before use and let the stand roll between work areas.
- A second stand for labs: Each H2 ships with one; an extra stand serves a second robot, area or test track.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the full manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | H2 Protective Bracket (protective stand, crane) |
| Product Type | Mobile lifting stand (accessory) |
| Compatible With | Unitree H2 humanoid (182 cm, about 70 kg with battery) |
| Construction | Castor-mounted base, column, lifting arm with hand-cranked winch and suspension hook |
| Castors | Lockable |
| Attachment | Lanyard through the suspension latches on both shoulders of the H2 |
| Used For | Unboxing, suspended power-on, shutdown, forced shutdown, long standby in damping mode |
| Rated Load | Confirm at quote |
| Lifting Height | Confirm at quote |
| Footprint | Confirm at quote |
| Weight | Confirm at quote |
| Lanyard Included | Confirm at quote |
| Quantity | 1 stand |
Industries
Frequently Asked Questions
It suspends the Unitree H2 on a shoulder lanyard so its feet are clear of the ground: for lifting it out of its case, powering it on, shutting it down, a forced shutdown and long standby.
A humanoid that loses joint power while standing falls, which can damage the robot and anything near it. The H2 is put back on the stand and into damping mode before it powers off.
It does: every H2 is delivered with one stand. This one is for a second robot, a second work area or a replacement.
The lanyard that connects the robot to the hook is part of the H2's own accessory set; whether one comes with this stand is confirmed at quote.
Rated load, lifting height, footprint and weight are confirmed with your quotation, before you order.
The Unitree H2 Protective Bracket (Crane) is priced at €806 in your market.
Recently Viewed
You haven't viewed any products yet.
