- 16 torque-controlled joints Three fingers and a thumb carry four joints each, and every joint takes torque commands on its own, so a lab can write and compare its own grasp controllers.
- 0.70 Nm through 1:369 gearing DC motors drive each joint through a 1:369 reduction to 0.70 Nm of torque and a joint speed of 0.11 s per 60°.
- Potentiometers at 0.002° Each joint angle is read by a potentiometer at a nominal 0.002° resolution for closed-loop control and trajectory recording.
- 1.08 kg, 5 kg payload A finger weighs 0.17 kg and the thumb 0.19 kg, 1.08 kg in all, and the hand carries up to 5 kg.
- CAN at 333 Hz on 24 V The hand runs over CAN at 333 Hz from a 24 V, 100 W supply, with Linux and Windows SDKs and ROS packages from Wonik Robotics.
- Joint sensing only The V4 measures joint position without a tactile skin, a simple platform for education and controller research; pressure-sensing fingertips arrive with the V5 family.
Description
The Wonik Allegro Hand V4 is Wonik Robotics' four-finger dexterous robotic hand, three fingers and a thumb, with 16 joints that are each torque-controlled on their own. Wonik presents it as a cost-effective, adaptable platform for grasp and manipulation research and for education, and it weighs 1.08 kg.
Torque control is why labs choose the V4. Every joint takes torque commands rather than positions alone, so a group can write and compare its own grasp controllers instead of replaying poses. DC motors drive each joint through a 1:369 reduction to a maximum of 0.70 Nm at up to 0.11 s per 60°, and potentiometers read each joint at a nominal 0.002°.
The V4 senses joint position only, with no tactile skin, carries a 5 kg payload and runs over CAN at 333 Hz on a 24 V, 100 W supply. A finger weighs 0.17 kg and the thumb 0.19 kg. Wonik Robotics supplies Linux and Windows SDKs and ROS packages for it.
For touch, the Allegro Hand V5 Plus keeps the three-finger-and-thumb layout with 360° pressure-sensing fingertips and a 15 kg payload, and the Allegro Hand V5 Sense adds sensing at the finger joints. The Allegro Hand V5 is a three-finger, 9-DoF design, and the Allegro Hand V6 F a five-finger hand with Modbus control. Compare them with our other dexterous robotic hands.
Key Capabilities
- 16 torque-controlled joints: Three fingers and a thumb carry four joints each, and every joint takes torque commands on its own, so a lab can write and compare its own grasp controllers.
- 0.70 Nm through 1:369 gearing: DC motors drive each joint through a 1:369 reduction to 0.70 Nm of torque and a joint speed of 0.11 s per 60°.
- Potentiometers at 0.002°: Each joint angle is read by a potentiometer at a nominal 0.002° resolution for closed-loop control and trajectory recording.
- 1.08 kg, 5 kg payload: A finger weighs 0.17 kg and the thumb 0.19 kg, 1.08 kg in all, and the hand carries up to 5 kg.
- CAN at 333 Hz on 24 V: The hand runs over CAN at 333 Hz from a 24 V, 100 W supply, with Linux and Windows SDKs and ROS packages from Wonik Robotics.
- Joint sensing only: The V4 measures joint position without a tactile skin, a simple platform for education and controller research; pressure-sensing fingertips arrive with the V5 family.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Wonik Robotics |
|---|---|
| Model | Allegro Hand V4 |
| Fingers | 4 (three fingers and a thumb) |
| Degrees of freedom | 16 active (4 per digit) |
| Joint control | Independent torque control on every joint |
| Actuation | DC motors |
| Gear ratio | 1:369 |
| Maximum torque | 0.70 Nm |
| Maximum joint speed | 0.11 s per 60° |
| Joint position sensing | Potentiometers, 0.002° nominal resolution |
| Tactile sensing | None |
| Weight | 1.08 kg (finger 0.17 kg, thumb 0.19 kg) |
| Payload | 5 kg |
| Communication | CAN, 333 Hz |
| Power | 24 V, 100 W |
| Software | Linux and Windows SDKs and ROS packages from Wonik Robotics |
| Hand side | Confirm at quote |
| Arm mounting adapter | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Three fingers and a thumb with four active joints each: 16 degrees of freedom, all independently torque-controlled.
No. It measures joint position with potentiometers at a nominal 0.002°. The V5, V5 Plus and V5 Sense add pressure-sensing fingertips, and the V6 F senses at the fingertips, joints and palm.
1.08 kg in all, with a 5 kg payload. Each finger weighs 0.17 kg and the thumb 0.19 kg.
Over CAN at 333 Hz, on a 24 V, 100 W supply. Wonik Robotics provides Linux and Windows SDKs and ROS packages for the V4, and mounting to your arm is confirmed with the quotation.
Both have three fingers, a thumb and 16 joints. The V5 Plus switches to current control, adds 360° pressure-sensing fingertips, runs CAN at 500 Hz on 120 W and carries 15 kg against the V4's 5 kg, at 1,024 g.
Wonik Allegro Hand V4 Four-Finger Dexterous Hand
- Regular price
- Request Quote for Price
Recently Viewed
You haven't viewed any products yet.
